home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-05 / 1108.zip / 1108.TXT next >
Text File  |  1993-03-08  |  2KB  |  51 lines

  1.                                FYI
  2. Note:  The origin of this information may be internal or external
  3. to Novell.  Novell makes every effort within its means to verify
  4. this information.  However, the information provided in this
  5. document is FOR YOUR INFORMATION only.  Novell makes no explicit
  6. or implied claims as to the validity of this information.)
  7.  
  8.           TITLE:  PRIMARY PARTITION TOO SMALL TO INSTALL DR DOS
  9.    DOCUMENT ID#:  FYI-M-1108
  10.            DATE:  05FEB93
  11.         PRODUCT:  DR DOS
  12. PRODUCT VERSION:  6
  13.      SUPERSEDES:  30JUL92
  14.  
  15.         SYMPTOM:  DR DOS WILL NOT INSTALL IF THE PRIMARY
  16. PARTITION IS TOO SMALL.
  17.  
  18.   ISSUE/PROBLEM:  If the primary partition is less than 2.5 MB
  19. (Megabytes) DR DOS will not install.  If Security is enabled
  20. during installation, FDISK cannot correct this situation because
  21. of the secure disk.  Installation will not complete, but security
  22. will be installed.
  23.  
  24.        SOLUTION:  Follow the procedures outlined below.
  25.  
  26. 1.   Boot from the original DR DOS 6 installation diskette  
  27. 2.   Press F10 to abort and exit to DOS
  28. 3.   From the A: Prompt, type SYS C:\  This command makes the
  29.      hard disk bootable 
  30. 4.   Copy the following files to the root directory of C:
  31.           LOGIN.EXE           CONFIG.SYS
  32.           AUTOEXEC.BAT        SSTORDRV.SYS        DEVSWAP.COM
  33.  
  34. 5.   Copy the following files to the DRDOS directory on C:
  35.           INSTALL.EXE         FDISK.COM
  36.  
  37. 6.   Rename C:\INSTALL.EXE to C:\SETUP.EXE  
  38. 7.   Remove the floppy from drive A: and reboot the computer
  39. 8.   Enter the Master password  
  40. 9.   At the C: prompt, type SETUP 
  41. 10.  Select only the SECURITY option  
  42. 11.  Enable SECURITY and enter a different password for the
  43.      MASTER PASSWORD and the USER PASSWORD  
  44. 12.  Complete the installation and exit to DOS  
  45. 13.  Run SETUP again  
  46. 14.  Disable SECURITY, complete the installation and exit to DOS
  47. 15.  Type FDISK and remove all partitions on the hard drive
  48. 16.  Create a primary partition of at least 3MB in size
  49.      (recommended- 10MB)  
  50. 17.  Reboot with the original installation diskette and complete
  51.      the installation process.